Ohm’s Law Calculator
Find positive DC voltage, current, resistance and power from two known quantities, with unit prefixes, equations and CSV output.
This tool processes its input contents in your browser instead of sending them to a processing service. Page, asset and fixed usage-measurement requests are described on the Privacy page.
Calculate positive DC voltage, current, resistance and power from two known quantities using explicit SI prefixes and a documented resistive model.
How to use it
- 1Select two different known quantities and their unit prefixes.
- 2Enter positive values and calculate the DC resistive relations.
- 3Review all four base-unit results and export CSV or the calculation report.
Example
- Input
- Voltage 12 V; current 2 A
- Output
- Resistance 6 Ω; power 24 W
12 divided by 2 gives 6 Ω; 12 multiplied by 2 gives 24 W.
What happens to your data
The circuit relations run as local arithmetic, with no measurement hardware, electricity-provider request or external model. The optional report contains your supplied values and calculated quantities only.
Last updated November 2026
Find missing values for a positive DC resistive model using two different known quantities. Choose voltage, current, resistance or power, then supply each value with a micro, milli, base, kilo or mega prefix. The result lists all four base-unit quantities and the equations used.
How it works
The calculation uses V=I×R and P=V×I. All six pairs of distinct known quantities are supported, including resistance plus power through the positive square-root solution. Inputs must be positive finite decimal values, optionally in scientific notation. Zero or negative values, identical selected quantities and out-of-range results fail with a clear message instead of returning Infinity or a misleading answer.
Base-unit inputs are limited to 1e−100 through 1e100 and calculated quantities to 1e−200 through 1e200. CSV output displays 12 significant digits; the report includes the calculated base-unit values and source unit choices. JavaScript floating arithmetic is used, so this is an approximate numerical calculation rather than exact rational algebra.
This model does not handle AC impedance, phase, nonlinear components, temperature-dependent resistance, safe component ratings, wire sizing or installation rules. The calculator solves the stated relations; it does not certify a real circuit or recommend working on energized equipment.
Worked example: Ohm’s Law Calculator example
- Input
- Voltage 12 V; current 2 A
- Result
- Resistance 6 Ω; power 24 W
12 divided by 2 gives 6 Ω; 12 multiplied by 2 gives 24 W.
Common use cases
- Check a classroom DC resistance calculation.
- Translate milliamp and kilohm inputs into one consistent base-unit result.
- Export a reviewed resistive calculation for a worksheet.
Frequently asked questions
Can I enter milliamps or kilohms?+
Yes. Choose the corresponding prefix; the displayed equations and CSV use base volts, amps, ohms and watts.
Does this calculate AC impedance?+
No. It uses a positive DC resistive model without phase, reactance or complex numbers.
Are component ratings included?+
No. Calculated electrical quantities do not establish safe ratings, thermal behavior or installation suitability.
Standards and limitations
Related tools
Triangle Solver
Solve a triangle from three known measurements, with all sides, angles, area, altitudes and a downloadable diagram.
Random Team Generator
Split up to 200 participants into random teams with balanced sizes and local TXT, CSV and JSON downloads.
Round-Robin Scheduler
Build a single round-robin schedule for up to 64 players or teams, with one meeting per pair, byes and complete CSV or JSON exports.
Quadratic Equation Solver
Solve ax² + bx + c = 0 with real or complex roots, an exact discriminant, the vertex and a downloadable result.